This tool is in beta. Confirm the printed marks before you trust the tape.
Chrono speed and finished arrow weight set the drag model. Linked from the
kinetic energy calculator
as ?fps= — weight follows your saved calculator defaults.
Tip type
Fixed blade adds drag vs a field point — match what you hunt with.
Peep-to-sight and peep height at full draw set how ballistic drop maps to inches on your printed tape. Measure peep-to-sight horizontally (peep center to pin/aperture) and peep height vertically (peep center to arrow shaft center).
Spot Hogg Fast Eddie / XL use rack-and-pinion geometry (not a flat slider). Select your model for correct wheel-tape spacing.
Units
The field above is full draw (peep center to arrow shaft). If you only measured at rest, enter that here plus bow geometry — we convert using string angle at draw vs brace.
Estimated full-draw peep height: —
Optional — thinner air at elevation reduces drag. Leave blank for sea level. Chronograph speed is usually measured at your altitude; enter density alt from your weather app or field forecast.
Peep-to-sight and peep height map drop to inches on the tape. Measure the 20–60 gap on your sight (often 0.75–1.5″) to scale print to your setup. Clear the gap field to print a ±fps family at native spacing.
Tick-to-tick length of the yardage range above, from a tape you already trust. Example: 3.64 for 20–130. The 20–60 gap stays on your calipers. Marks past 60 spread out so the printed tape matches this length. Set Start to 20 if 3.64 is measured from the 20 mark.
Enter your measured 20–60 gap to scale the printed tape to your sight.
Tapes to print
Preview shows one tape without an account. Create a free account to choose how many tapes to preview and print.
Tape set
Tick spacing
2 yd includes 1 yd marks between — no extra toggle needed.
Tick marks
1 yd mark align
Align short 1 yd tick marks left, center, or right — works with 1 yd or 2 yd spacing.
Yardage labels
Split labels
10 yd labels on the right, 5 yd on the left when using 10 + 5 yd labels. With 10 yd only, even decades (20/40/60) right, odd (30/50) left.
Yardage text
5 yd tick color
Highlights 25, 35, 45… tick marks when using 2 yd spacing (or any yard ending in 5 except 10s).
5 yd label color
Turns on with 10 + 5 yd labels. Colors 25, 35, 45… separately — defaults to your 5 yd tick color. Switch back to Same as text if you want them to match the 10s.
Print page
Print at 100% scale. Use the 2×2 in square to verify X and Y.
Leave height blank for auto. 4×6 prints two labels: setup on the first, tapes on the second.
After a test print, measure the 2×2 in square on both axes (or the 1 in cross). Enter what it should be vs what you got — we scale the tape to match.
Welcome back. We remember your account (), but you need to sign in on the store (not just your orders page) to print here. Restore it to print, pick multiple tapes, and load saved bows.
Sign in to print. Preview one tape here anytime. Sign in on the store to choose multiple tapes, save bow setups, and print. Sign in on the store — returns you here after login. Already signed in at account.titlexarchery.com? You still need this once so the calculator can see you.
Saves speed, arrow weight, gap, layout, colors, and print settings for this bow.
Preview: 1 tape · sign in to choose multiple tapes and print.
Related resources: arrow calculators, phone chrono (Beta), arrow flight calculator, kinetic energy calculator, 3D custom arrow builder.
